Investigation of rheological properties of aged polymer modified binders

Erkut Yalçın

doi:10.38088/jise.1420288

EN

Investigation of rheological properties of aged polymer modified binders

Abstract

Bituminous pavement layers used in road flexible superstructure are the top layer that is directly exposed to the effects of traffic and the environment and therefore must be very robust in terms of mechanical properties. To enhance the resistance of pavements against traffic loads and permanent deformations, Styrene Butadiene-Styrene (SBS) polymer additive is generally preffered. The high demand for SBS often presents challenges in obtaining it when needed, leading to a consideration of alternative additives. In this study, three different polymers, namely 701, 611, and SBS, were compared to assess their effectiveness as modifiers for bituminous materials. Modified bitumens were prepared using SBS, 701 and 611 polymers prepared under specified conditions. The modified binders were subjected to long and short term ageing. For both pure and modified binders, the Superpave binder (dynamic shear rheometer) test was conducted. Consequently, these binders improved the performance of the pure binder when the Superpave binder test findings of the four distinct binders employed in the study were analyzed.

Keywords

Supporting Institution

Firat University Scientific Research Projects program (FUBAP)

Project Number

MF.20.33.

Thanks

This study was carried out within the scope of Firat University Scientific Research Projects program (FUBAP) Research Project MF.20.33. We gratefully acknowledge the financial support pro-vided by FUBAP.

References

[1] Nciri, N., Kim, N., and Cho, N. (2017) New insights into the effects of styrene-butadiene-styrene polymer modifier on the structure, properties, and performance of asphalt binder: The case of AP-5 asphalt and solvent deasphalting pitch. Materials Chemistry and Physics, 193, 477–495.
[2] Liang, M., Liang, P., Fan, W., Qian, C., Xin, X., Shi, J., and Nan, G. (2015) Thermo-rheological behavior and compatibility of modified asphalt with various styrene–butadiene structures in SBS copolymers. Materials & Design, 88, 177–185.
[3] Apostolidis, P., Liu, X., Erkens, S., and Scarpas, A. (2019) Evaluation of epoxy modification in bitumen. Construction and Building Materials, 208, 361–368.
[4] Özdemir, A.M., and Yılmaz, B. (2023) Investigation of flow properties and activation energy of magnesium lignosulfonate modified bitumen. FIRAT UNIVERSITY JOURNAL OF EXPERIMENTAL AND COMPUTATIONAL ENGINEERING, 2 (1), 38–45.
[5] Sengoz, B., and Isikyakar, G. (2008) Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. Journal of Hazardous Materials, 150 (2), 424–432.
[6] Kaya Ozdemir, D., Topal, A., and McNally, T. (2021) Relationship between microstructure and phase morphology of SBS modified bitumen with processing parameters studied using atomic force microscopy. Construction and Building Materials, 268, 121061.
[7] Ma, J., Sun, G., Sun, D., Yu, F., Hu, M., and Lu, T. (2021) Application of gel permeation chromatography technology in asphalt materials: A review. Construction and Building Materials, 278, 122386.
[8] Sengoz, B., Topal, A., and Isikyakar, G. (2009) Morphology and image analysis of polymer modified bitumens. Construction and Building Materials, 23 (5), 1986–1992.

[9] Behnood, A., and Modiri Gharehveran, M. (2019) Morphology, rheology, and physical properties of polymer-modified asphalt binders. European Polymer Journal, 112, 766–791.
[10] Jiang, Y., Liu, Y., Gong, J., Li, C., Xi, Z., Cai, J., and Xie, H. (2018) Microstructures, thermal and mechanical properties of epoxy asphalt binder modified by SBS containing various styrene-butadiene structures. Materials and Structures, 51 (4), 86.
[11] Zhu, J., Birgisson, B., and Kringos, N. (2014) Polymer modification of bitumen: Advances and challenges. European Polymer Journal, 54, 18–38.
[12] Yan, X., Wu, D., Hu, K., Zhang, W., Xing, J., Cui, L., Shi, S., Yang, J., and Yang, C. (2023) The Modification Mechanism, Evaluation Method, and Construction Technology of Direct-to-Plant SBS Modifiers in Asphalt Mixture: A Review. Polymers, 15 (13), 2768.
[13] Pandey, A., Sohel Islam, S., Ransinchung R.N, G.D., and Ravindranath, S.S. (2022) Quantifying the effect of SBS molecular structure on the upper service temperature rheological properties of modified binders. Construction and Building Materials, 352, 128826.
[14] Islam, S.S., Singh, S.K., Ransinchung, G.D.R.N., and Ravindranath, S.S. (2023) Imperative role of SBS molecular structure on the performance properties of modified binders and asphalt mixes. International Journal of Pavement Engineering, 24 (1).
[15] Zhu, X., Wang, Y., Miljković, M., Li, R., and Hao, G. (2024) Effects of polymer structure on the physicochemical and performance-related properties of SBS-modified asphalt binders subjected to short-term aging. Construction and Building Materials, 411, 134446.
[16] Vlachovicova, Z., Wekumbura, C., Stastna, J., and Zanzotto, L. (2007) Creep characteristics of asphalt modified by radial styrene–butadiene–styrene copolymer. Construction and Building Materials, 21 (3), 567–577.
[17] Martínez‐Estrada, A., Chávez‐Castellanos, A.E., Herrera‐Alonso, M., and Herrera‐Nájera, R. (2010) Comparative study of the effect of sulfur on the morphology and rheological properties of SB‐ and SBS‐modified asphalt. Journal of Applied Polymer Science, 115 (6), 3409–3422.
[18] Jelčić, Ž., Ocelić Bulatović, V., Jurkaš Marković, K., and Rek, V. (2017) Multi-fractal morphology of un-aged and aged SBS polymer-modified bitumen. Plastics, Rubber and Composites, 46 (2), 77–98.
[19] Schaur, A., Unterberger, S., and Lackner, R. (2017) Impact of molecular structure of SBS on thermomechanical properties of polymer modified bitumen. European Polymer Journal, 96, 256–265.
[20] Mouillet, V., Lamontagne, J., Durrieu, F., Planche, J.-P., and Lapalu, L. (2008) Infrared microscopy investigation of oxidation and phase evolution in bitumen modified with polymers. Fuel, 87 (7), 1270–1280.
[21] Singh, S.K., Kumar, Y., and Ravindranath, S.S. (2018) Thermal degradation of SBS in bitumen during storage: Influence of temperature, SBS concentration, polymer type and base bitumen. Polymer Degradation and Stability, 147, 64–75.
[22] Ali, A., Kabir, S.F., Al-Badr, B., Alfalah, A., Xie, Z., Decarlo, C., Elshaer, M., and Mehta, Y. (2022) Laboratory performance of dense graded asphalt mixtures prepared using highly polymer modified binders containing corn oil as softening agent. Construction and Building Materials, 345, 128336.
[23] Rajan, B., Suchismita, A., and Singh, D. (2023) Rutting Resistance Evaluation of Highly Polymer-Modified Asphalt Binder and Mixes Using Different Performance Parameters. Journal of Materials in Civil Engineering, 35 (8).
[24] Hao, G., Huang, W., Yuan, J., Tang, N., and Xiao, F. (2017) Effect of aging on chemical and rheological properties of SBS modified asphalt with different compositions. Construction and Building Materials, 156, 902–910.
[25] Zhao, X., Wang, S., Wang, Q., and Yao, H. (2016) Rheological and structural evolution of SBS modified asphalts under natural weathering. Fuel, 184, 242–247.
[26] Yan, C., Huang, W., Lin, P., Zhang, Y., and Lv, Q. (2019) Chemical and rheological evaluation of aging properties of high content SBS polymer modified asphalt. Fuel, 252, 417–426.
[27] Wang, P., Dong, Z., Tan, Y., and Liu, Z. (2017) Anti-ageing properties of styrene–butadiene–styrene copolymer-modified asphalt combined with multi-walled carbon nanotubes. Road Materials and Pavement Design, 18 (3), 533–549.
[28] Sayedzada, S.E., Ozdemir, A.M., Yalcin, E., and Yilmaz M. (2024) Investigation of mechanical properties of hot mix asphalts with modified binders with SBS, 611 and 701 polymers, Polymer Bulletin, 81(4), 3695-3724.
[29] Yalcin, E., and Demirbag, A. (2022) Effects of modified binders obtained from different polymers on conventional and rheological properties. Construction and Building Materials, 357, 129366.
[30] Zhang, J., Airey, G.D., Grenfell, J., and Yao, Z. (2017) Laboratory evaluation of Rediset modified bitumen based on rheology and adhesion properties. Construction and Building Materials, 152, 683–692.

Details

Primary Language

English

Subjects

Transportation Engineering

Journal Section

Research Article

Authors

Erkut Yalçın ^*
0000-0002-6389-4211
Türkiye

Early Pub Date

December 11, 2024

Publication Date

December 31, 2024

Submission Date

January 15, 2024

Acceptance Date

April 4, 2024

Published in Issue

Year 2024 Volume: 8 Number: 2

DOI

https://doi.org/10.38088/jise.1420288

IZ

https://izlik.org/JA37UA83AF

Cite

RIS / Bibtex

APA

Yalçın, E. (2024). Investigation of rheological properties of aged polymer modified binders. Journal of Innovative Science and Engineering, 8(2), 146-159. https://doi.org/10.38088/jise.1420288

AMA

1.Yalçın E. Investigation of rheological properties of aged polymer modified binders. JISE. 2024;8(2):146-159. doi:10.38088/jise.1420288

Chicago

Yalçın, Erkut. 2024. “Investigation of Rheological Properties of Aged Polymer Modified Binders”. Journal of Innovative Science and Engineering 8 (2): 146-59. https://doi.org/10.38088/jise.1420288.

EndNote

Yalçın E (December 1, 2024) Investigation of rheological properties of aged polymer modified binders. Journal of Innovative Science and Engineering 8 2 146–159.

IEEE

[1]E. Yalçın, “Investigation of rheological properties of aged polymer modified binders”, JISE, vol. 8, no. 2, pp. 146–159, Dec. 2024, doi: 10.38088/jise.1420288.

ISNAD

Yalçın, Erkut. “Investigation of Rheological Properties of Aged Polymer Modified Binders”. Journal of Innovative Science and Engineering 8/2 (December 1, 2024): 146-159. https://doi.org/10.38088/jise.1420288.

JAMA

1.Yalçın E. Investigation of rheological properties of aged polymer modified binders. JISE. 2024;8:146–159.

MLA

Yalçın, Erkut. “Investigation of Rheological Properties of Aged Polymer Modified Binders”. Journal of Innovative Science and Engineering, vol. 8, no. 2, Dec. 2024, pp. 146-59, doi:10.38088/jise.1420288.

Vancouver

1.Erkut Yalçın. Investigation of rheological properties of aged polymer modified binders. JISE. 2024 Dec. 1;8(2):146-59. doi:10.38088/jise.1420288

Cited By

Regional Variations in the Physical and Rheological Properties of Asphalt Binders Recovered from Earthquake-Damaged Roads Following the February 6, 2023 Türkiye Earthquakes

Firat University Journal of Experimental and Computational Engineering

https://doi.org/10.62520/fujece.1766725

Öz

Investigation of rheological properties of aged polymer modified binders

Abstract

Keywords

Supporting Institution

Project Number

Thanks

References

Details

Primary Language

Subjects

Journal Section

Authors

Early Pub Date

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite

Cited By

Regional Variations in the Physical and Rheological Properties of Asphalt Binders Recovered from Earthquake-Damaged Roads Following the February 6, 2023 Türkiye Earthquakes