Research Article
BibTex RIS Cite
Year 2019, , 66 - 72, 31.12.2019
https://doi.org/10.38088/jise.641810

Abstract

References

  • [1] Liu, X., Zhang, M. (2000). Studies on PbS and PbSe detectors for IR system. International journal of Infrared and Millimeter waves, 21(10), 1697-1701.
  • [2] Zhou, R., Niu, H., Ji, F., Wan, L., Mao, X., Guo, H., Xui J., Cao, G., (2016). Band-structure tailoring and surface passivation for highly efficient near-infrared responsive PbS quantum dot photovoltaics. Journal of Power Sources, 333, 107-117.
  • [3] Göde, F., Güneri, E., Emen, F. M., Kafadar, V. E., Ünlü, S. (2014). Synthesis, structural, optical, electrical and thermoluminescence properties of chemically deposited PbS thin films. Journal of Luminescence, 147, 41-48.
  • [4] Sun, Z., Liu, Z., Li, J., Tai, G. A., Lau, S. P., Yan, F., (2012). Infrared photodetectors based on CVD‐grown graphene and PbS quantum dots with ultrahigh responsivity. Advanced materials, 24(43), 5878-5883.
  • [5] Bandyopadhyay, S. (2012). Performance of nanocrystalline PbS gas sensor with improved cross-sensitivity. Particulate Science and Technology, 30(1), 43-54.
  • [6] Ralston, R. W., Walpole, J. N., Calawa, A. R., Harman, T. C., McVittie, J. P. (1974). High cw output power in stripe‐geometry PbS diode lasers. Journal of Applied Physics, 45(3), 1323-1325.
  • [7] Göde, F., Ünlü, S. (2019). Synthesis and characterization of CdS window layers for PbS thin film solar cells. Materials Science in Semiconductor Processing, 90, 92-100.
  • [8] Soetedjo, H., Siswanto, B., Aziz, I. (2018). Deposition of Cu-doped PbS thin films with low resistivity using DC sputtering. Results in physics, 8, 903-907.
  • [9] da Silva Filho, J. M. C., Marques, F. C. (2019). Structural and optical temperature-dependent properties of PbS thin films deposited by radio frequency sputtering. Materials Science in Semiconductor Processing, 91, 188-193.
  • [10] Kumar, S., Sharma, T. P., Zulfequar, M., & Husain, M. (2003). Characterization of vacuum evaporated PbS thin films. Physica B: Condensed Matter, 325, 8-16.
  • [11] Rosario, S. R., Kulandaisamy, I., Kumar, K. D. A., Arulanantham, A. M. S., Valanarasu, S., Youssef, M. A., Awwad, N. S. (2019). Deposition of p-type Al doped PbS thin films for heterostructure solar cell device using feasible nebulizer spray pyrolysis technique. Physica B: Condensed Matter, 411704.
  • [12] Perednis, D., Gauckler, L. J. (2005). Thin film deposition using spray pyrolysis. Journal of electroceramics, 14(2), 103-111.
  • [13] Filipovic, L., Selberherr, S., Mutinati, G. C., Brunet, E., Steinhauer, S., Köck, A., Schrank, F. (2013, July). Modeling spray pyrolysis deposition. In Proceedings of the world congress on engineering (Vol. 2, pp. 987-992).
  • [14] Ardekani, S. R., Aghdam, A. S. R., Nazari, M., Bayat, A., Yazdani, E., Saievar-Iranizad, E. (2019). A comprehensive review on ultrasonic spray pyrolysis technique: Mechanism, main parameters and applications in condensed matter. Journal of Analytical and Applied Pyrolysis, 104631.
  • [15] Sarica E., BilginV., (2017). Study of some physical properties of ultrasonically spray deposited silver doped lead sulphide thin films. Materials Science in Semiconductor Processing, 68, 288-294.
  • [16] Atay F., Bilgin V., Akyuz I., Kose, S., (2003). The effect of In doping on some physical properties of CdS films, Materials Science in Semiconductor Processing, 6, 197-203.
  • [17] Cullity B.D., (1956). Elements of X-ray Diffraction. Addison-Wesley Publishing Company, Inc., USA.
  • [18] Kumar R., Das R., Gupta M., Ganesan V., (2014). Preparation of nanocrystalline Sb doped PbS thin films and their structural, optical, and electrical characterization, Superlattices and microstructures. 75 601-612.
  • [19] Rashad M. M., Fouad O.A., (2014). Solvothermal growth of Ti1−xSnxO2 semiconductor nanopowders. Applied Nanoscience, 4(3), 379-383.
  • [20] Turgut G., (2018) Evaluation of Nd-Loaded SnO2:F Films Coated via Spray Pyrolysis. Journal of Electronic Materials, 47(7), 4149-4155.
  • [21] Mote, V. D., Purushotham, Y., Dole, B. N. (2012). Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles. Journal of Theoretical and Applied Physics, 6(1), 6.
  • [22] Sarica, E., Bilgin, V., (2017). Effect of Pb: S molar ratio in precursor solution on the properties of lead sulphide thin films by ultrasonic spray pyrolysis. Materials Science in Semiconductor Processing, 71, 42-49.

The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis

Year 2019, , 66 - 72, 31.12.2019
https://doi.org/10.38088/jise.641810

Abstract

In this work, we aimed to
deposit PbS thin films at relatively low temperature and therefore thin films
were deposited onto preheated glass substrates at 473 K and 523 K by
ultrasonically spraying of equimolar aqueous solution of lead acetate and
thiourea. The thickness of deposited thin films was determined by spectroscopic
ellipsometry (SE) prior to investigate physical properties of deposited PbS
films. In order to investigate structural and morphological properties of PbS
thin films, x-ray diffraction (XRD) patterns and Atomic Force Microscopy (AFM)
images were obtained. Crystal structure, mean crystallite size, lattice
parameters, micro-strain of deposited thin films were evaluated by means of XRD
patterns and it was seen that deposited PbS thin films were successfully
obtained in polycrystalline form with cubic crystal structure. Also lattice
parameter of a  was calculated as 5.866 Å
and 5.870 Å for thin films deposited at 473 K and 523 K, respectively.
Additionally, the surface roughness of PbS thin films was determined via AFM
images as 5.8 nm and 9.9 nm in non-contact mode. The obtained results confirm
that deposition of PbS thin films can be successfully achieved at relatively
low temperature. 

References

  • [1] Liu, X., Zhang, M. (2000). Studies on PbS and PbSe detectors for IR system. International journal of Infrared and Millimeter waves, 21(10), 1697-1701.
  • [2] Zhou, R., Niu, H., Ji, F., Wan, L., Mao, X., Guo, H., Xui J., Cao, G., (2016). Band-structure tailoring and surface passivation for highly efficient near-infrared responsive PbS quantum dot photovoltaics. Journal of Power Sources, 333, 107-117.
  • [3] Göde, F., Güneri, E., Emen, F. M., Kafadar, V. E., Ünlü, S. (2014). Synthesis, structural, optical, electrical and thermoluminescence properties of chemically deposited PbS thin films. Journal of Luminescence, 147, 41-48.
  • [4] Sun, Z., Liu, Z., Li, J., Tai, G. A., Lau, S. P., Yan, F., (2012). Infrared photodetectors based on CVD‐grown graphene and PbS quantum dots with ultrahigh responsivity. Advanced materials, 24(43), 5878-5883.
  • [5] Bandyopadhyay, S. (2012). Performance of nanocrystalline PbS gas sensor with improved cross-sensitivity. Particulate Science and Technology, 30(1), 43-54.
  • [6] Ralston, R. W., Walpole, J. N., Calawa, A. R., Harman, T. C., McVittie, J. P. (1974). High cw output power in stripe‐geometry PbS diode lasers. Journal of Applied Physics, 45(3), 1323-1325.
  • [7] Göde, F., Ünlü, S. (2019). Synthesis and characterization of CdS window layers for PbS thin film solar cells. Materials Science in Semiconductor Processing, 90, 92-100.
  • [8] Soetedjo, H., Siswanto, B., Aziz, I. (2018). Deposition of Cu-doped PbS thin films with low resistivity using DC sputtering. Results in physics, 8, 903-907.
  • [9] da Silva Filho, J. M. C., Marques, F. C. (2019). Structural and optical temperature-dependent properties of PbS thin films deposited by radio frequency sputtering. Materials Science in Semiconductor Processing, 91, 188-193.
  • [10] Kumar, S., Sharma, T. P., Zulfequar, M., & Husain, M. (2003). Characterization of vacuum evaporated PbS thin films. Physica B: Condensed Matter, 325, 8-16.
  • [11] Rosario, S. R., Kulandaisamy, I., Kumar, K. D. A., Arulanantham, A. M. S., Valanarasu, S., Youssef, M. A., Awwad, N. S. (2019). Deposition of p-type Al doped PbS thin films for heterostructure solar cell device using feasible nebulizer spray pyrolysis technique. Physica B: Condensed Matter, 411704.
  • [12] Perednis, D., Gauckler, L. J. (2005). Thin film deposition using spray pyrolysis. Journal of electroceramics, 14(2), 103-111.
  • [13] Filipovic, L., Selberherr, S., Mutinati, G. C., Brunet, E., Steinhauer, S., Köck, A., Schrank, F. (2013, July). Modeling spray pyrolysis deposition. In Proceedings of the world congress on engineering (Vol. 2, pp. 987-992).
  • [14] Ardekani, S. R., Aghdam, A. S. R., Nazari, M., Bayat, A., Yazdani, E., Saievar-Iranizad, E. (2019). A comprehensive review on ultrasonic spray pyrolysis technique: Mechanism, main parameters and applications in condensed matter. Journal of Analytical and Applied Pyrolysis, 104631.
  • [15] Sarica E., BilginV., (2017). Study of some physical properties of ultrasonically spray deposited silver doped lead sulphide thin films. Materials Science in Semiconductor Processing, 68, 288-294.
  • [16] Atay F., Bilgin V., Akyuz I., Kose, S., (2003). The effect of In doping on some physical properties of CdS films, Materials Science in Semiconductor Processing, 6, 197-203.
  • [17] Cullity B.D., (1956). Elements of X-ray Diffraction. Addison-Wesley Publishing Company, Inc., USA.
  • [18] Kumar R., Das R., Gupta M., Ganesan V., (2014). Preparation of nanocrystalline Sb doped PbS thin films and their structural, optical, and electrical characterization, Superlattices and microstructures. 75 601-612.
  • [19] Rashad M. M., Fouad O.A., (2014). Solvothermal growth of Ti1−xSnxO2 semiconductor nanopowders. Applied Nanoscience, 4(3), 379-383.
  • [20] Turgut G., (2018) Evaluation of Nd-Loaded SnO2:F Films Coated via Spray Pyrolysis. Journal of Electronic Materials, 47(7), 4149-4155.
  • [21] Mote, V. D., Purushotham, Y., Dole, B. N. (2012). Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles. Journal of Theoretical and Applied Physics, 6(1), 6.
  • [22] Sarica, E., Bilgin, V., (2017). Effect of Pb: S molar ratio in precursor solution on the properties of lead sulphide thin films by ultrasonic spray pyrolysis. Materials Science in Semiconductor Processing, 71, 42-49.
There are 22 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Research Articles
Authors

Emrah Sarıca 0000-0002-9339-5114

Vildan Bilgin 0000-0002-0937-6763

Publication Date December 31, 2019
Published in Issue Year 2019

Cite

APA Sarıca, E., & Bilgin, V. (2019). The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis. Journal of Innovative Science and Engineering, 3(2), 66-72. https://doi.org/10.38088/jise.641810
AMA Sarıca E, Bilgin V. The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis. JISE. December 2019;3(2):66-72. doi:10.38088/jise.641810
Chicago Sarıca, Emrah, and Vildan Bilgin. “The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis”. Journal of Innovative Science and Engineering 3, no. 2 (December 2019): 66-72. https://doi.org/10.38088/jise.641810.
EndNote Sarıca E, Bilgin V (December 1, 2019) The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis. Journal of Innovative Science and Engineering 3 2 66–72.
IEEE E. Sarıca and V. Bilgin, “The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis”, JISE, vol. 3, no. 2, pp. 66–72, 2019, doi: 10.38088/jise.641810.
ISNAD Sarıca, Emrah - Bilgin, Vildan. “The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis”. Journal of Innovative Science and Engineering 3/2 (December 2019), 66-72. https://doi.org/10.38088/jise.641810.
JAMA Sarıca E, Bilgin V. The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis. JISE. 2019;3:66–72.
MLA Sarıca, Emrah and Vildan Bilgin. “The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis”. Journal of Innovative Science and Engineering, vol. 3, no. 2, 2019, pp. 66-72, doi:10.38088/jise.641810.
Vancouver Sarıca E, Bilgin V. The Effect of Substrate Temperature on The Structure and Morphologies of PbS Thin Films Deposited by Ultrasonic Spray Pyrolysis. JISE. 2019;3(2):66-72.


Creative Commons License

The works published in Journal of Innovative Science and Engineering (JISE) are licensed under a  Creative Commons Attribution-NonCommercial 4.0 International License.