Research Article

A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application

Volume: 5 Number: 2 December 18, 2021
EN

A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application

Abstract

DC-DC converters are widely applied in different industrials such the Renewable Energy Sources (RESs) utilizations, Electrical Vehicle (EV) applications and power transmission technologies. Different topologies are presented for these converters including the modified Buck, Boost or Buck-Boost converters, switched-inductors and switched-capacitor-based structures and circuits with transformers. A DC-DC converter is needed to transmit and make the voltage applicable to the grid or home applications to use the different levels of the generated voltage by different voltage sources. In this study, a switched-inductor-based converter is presented to operate in low or high-power utilizations. One application of the proposed converter is aiming to supply the necessary voltages to the devices requiring low voltage, such as mobile phones and computers, and transmit the obtained voltage to the electricity grids that can be categorized at the high-voltage applications. Based on the load voltages level, there is a need to obtain a high-gain converter, which can operate as a buck and boost converter. Since electrical energy must be transmitted as lossless as possible, the converter must be highly efficient. In the proposed converter, the number of the components are optimized and only one power switch is used. The main advantage of the converter is that it can be controlled simply since it contains only one power switch. Also, three diodes are used in the proposed structure that only one of them is activated at the time intervals that the switch is on ON-state and the other two diodes are activated for the OFF-state of the switch. All these features can help for obtaining smaller dynamic and switching losses through the power transmission process. Both inductors are charged in the ON-state and discharged in the OFF-state operational modes that can guarantee a Continuous Conduction Mode (CCM) working conditions for the converter. Also, a capacitor is used to transfer the voltage between the input and output sides during the switching process.

Keywords

References

  1. [1] Erickson, R. W., & Maksimovic, D. (2007). Fundamentals of power electronics. Springer Science & Business Media.
  2. [2] Ghaderi D, Molaverdi D, Kokabi A, Papari B. A multi-phase impedance source inverter with an improved controller structure. Electr Eng 2020;102(2):683–700. https://doi.org/10.1007/s00202-019-00903-9.
  3. [3] Li S, Subramaniam U, Yang G, Ghaderi D, Rajabiyoun N. Investigation of the thermal loading and random vibration influences on fatigue life of the solder joints for a metal-oxide-semiconductor-field-effect transistor in a DC-DC power boost converter. IEEE Access 2020; 8:64011–9. https://doi.org/10.1109/ ACCESS.2020.2985320.
  4. [4] Ghaderi Davood, Padmanaban Sanjeevikumar, Maroti Pandav Kiran, Papari Behnaz, Holm-Nielsen Jens Bo. Design and implementation of an improved sinusoidal controller for a two-phase enhanced impedance source boost inverter. Comput Electr Eng 2020;83. https://doi.org/10.1016/j. compeleceng.2020.106575.
  5. [5] Ghaderi D. An FPGA-based switching photovoltaic-connected inverter topology for leakage current suppression in grid-connected utilizations. Int J Circ Theor Appl 2020:1–20. https://doi.org/10.1002/cta.2844.
  6. [6] Huang R, Hong F, Ghaderi D. Sliding mode controller-based e-bike charging station for photovoltaic applications. Int Trans Electr Energy Syst 2020. https://doi.org/ 10.1002/2050-7038.12300.
  7. [7] Bayrak G, Ghaderi D. An improved step-up converter with a developed real-time fuzzy-based MPPT controller for PV-based residential applications. Int Trans Electr Energy Syst. 2019: e12140. https://doi.org/10.1002/2050-7038.12140.
  8. [8] Ghaderi D, Maroti PK, Sanjeevikumar P, Holm-Nielsen JB, Hossain E, Nayyar A. A modified step-up converter with small signal analysis-based controller for renewable resource applications. Appl. Sci. 2020; 10:102.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

Hatice Kurnaz Araz
0000-0002-9641-0981
Türkiye

Musa Aydın
0000-0001-5545-1456
Türkiye

Publication Date

December 18, 2021

Submission Date

October 7, 2020

Acceptance Date

March 23, 2021

Published in Issue

Year 1970 Volume: 5 Number: 2

APA
Kurnaz Araz, H., Ertekin, D., & Aydın, M. (2021). A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application. Journal of Innovative Science and Engineering, 5(2), 129-142. https://doi.org/10.38088/jise.807250
AMA
1.Kurnaz Araz H, Ertekin D, Aydın M. A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application. JISE. 2021;5(2):129-142. doi:10.38088/jise.807250
Chicago
Kurnaz Araz, Hatice, Davut Ertekin, and Musa Aydın. 2021. “A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application”. Journal of Innovative Science and Engineering 5 (2): 129-42. https://doi.org/10.38088/jise.807250.
EndNote
Kurnaz Araz H, Ertekin D, Aydın M (December 1, 2021) A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application. Journal of Innovative Science and Engineering 5 2 129–142.
IEEE
[1]H. Kurnaz Araz, D. Ertekin, and M. Aydın, “A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application”, JISE, vol. 5, no. 2, pp. 129–142, Dec. 2021, doi: 10.38088/jise.807250.
ISNAD
Kurnaz Araz, Hatice - Ertekin, Davut - Aydın, Musa. “A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application”. Journal of Innovative Science and Engineering 5/2 (December 1, 2021): 129-142. https://doi.org/10.38088/jise.807250.
JAMA
1.Kurnaz Araz H, Ertekin D, Aydın M. A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application. JISE. 2021;5:129–142.
MLA
Kurnaz Araz, Hatice, et al. “A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application”. Journal of Innovative Science and Engineering, vol. 5, no. 2, Dec. 2021, pp. 129-42, doi:10.38088/jise.807250.
Vancouver
1.Hatice Kurnaz Araz, Davut Ertekin, Musa Aydın. A PID-Controlled High DC Voltage Gain Switched-Inductor and Switched-Capacitor-Based DC-DC Power Buck-Boost Converter Design for Solar Energy Application. JISE. 2021 Dec. 1;5(2):129-42. doi:10.38088/jise.807250

Cited By


Creative Commons License

The works published in Journal of Innovative Science and Engineering (JISE) are licensed under a  Creative Commons Attribution-NonCommercial 4.0 International License.