Araştırma Makalesi
BibTex RIS Kaynak Göster

Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution

Yıl 2018, Cilt: 2 Sayı: 1, 19 - 24, 20.06.2018

Öz

Corrosion behaviour of the twin-roll casting (TRC) 8006 Al alloys has been investigated as a function of foil thickness by two different polarization techniques; Tafel extrapolation and linear polarization resistance. Polarization curve changes depending on foil thickness for the TRC 8006 Al alloys have been achieved using both the polarization techniques, respectively. The measurements were performed using a three-electrode electrochemical cell system. Tafel slopes, polarization resistance, density of corrosion current, corrosion potential and corrosion rate values have been calculated based on the data collected from both method’s outcomes and compared with those of each techniques used. For these two polarization curves, the corrosion rate values obtained for TRC 8006 Al alloy with a thickness of 180 µm is remarkably lower than the obtained results of TRC 8006 Al alloy with a thickness of 150 µm. This specifies that a decrease in foil thickness of the TRC 8006 Al alloys increased corrosion rate of the TRC 8006 Al alloys and thus the two techniques used in the present study to determine corrosion rate appears to be reliable methods for a long-term corrosion behaviour.               

Kaynakça

  • [1] Nisancioglu, K., Holtan, H. (1978). Measurement of the critical pitting potential of aluminium. Corrosion Science. 18(9): 835-849.
  • [2] Wang, J., Zhou, X., Thompson, G.E., Hunter, J.A., Yuan, Y. (2015). Near-surface microstructure on twin-roll cast 8906 aluminum alloy. Metallurgical and Materials Transactions A. 46(6): 26882695.
  • [3] Rahimi, M., Fojan, P., Gurevich, L., Afshari, A. (2015). Aluminium alloy 8011: Surface characteristics. in Applied Mechanics and Materials. 2015. Trans Tech Publ.
  • [4] Sanders, R. E. (2012). Continuous casting for aluminum sheet: a product perspective. JOM. 64(2): 291-301.
  • [5] Okeoma Kelechukwu, B., Owate Israel, O., Oguzie Emeka, E., Mejeha Ihebrodike, M. (2012). Effects of Heat Treatment on the Electrochemical Corrosion Behaviour of Aluminum Alloy AA8011 in 0.1 M H2SO4 Aqueous Acid Media.
  • [6] Barekar, N., Dhindaw, B. (2014). Twin-roll casting of aluminum alloys–an overview. Materials and Manufacturing Processes. 29(6): 651-661.
  • [7] Davis, J.R. (1999). Corrosion of aluminum and aluminum alloys. Asm International.
  • [8] Park, S.-A., Kim, J., He, Y., Shin, K., Yoon, J. (2014). Comparative study on the corrosion behavior of the cold rolled and hot rolled low-alloy steels containing copper and antimony in flue gas desulfurization environment. The Physics of Metals and Metallography. 115(13): 1285-1294.
  • [9] Kurt, K., Diplas, S., Walmsley, J.C., Nisancioglu, K. (2013). Effect of Trace Elements Lead and Tin on Anodic Activation of AA8006 Aluminum Sheet. Journal of The Electrochemical Society. 160(11): C542-C552.
  • [10] Kucuk, İ . (2018). Effect of Cold Rolling Reduction Rate on Corrosion Behaviour of Twin-roll Cast 8006 Aluminium Alloys. Cumhuriyet Science Journal, 39 (1): 233-242.
  • [11] van der Merwe, J., Palazzo, A. (2015). Comparison of linear polarization resistance corrosion monitoring probe readings and immersion test results for typical cooling water conditions. Journal of the Southern African Institute of Mining and Metallurgy. 115(3): 173-178.
  • [12] Zou, Y., Wang, J., Zheng, Y. (2011). Electrochemical techniques for determining corrosion rate of rusted steel in seawater. Corrosion Science. 53(1): 208-216.
  • [13] Stern, M. (1958). A method for determining corrosion rates from linear polarization data. Corrosion. 14(9): 60-64.
Yıl 2018, Cilt: 2 Sayı: 1, 19 - 24, 20.06.2018

Öz

Kaynakça

  • [1] Nisancioglu, K., Holtan, H. (1978). Measurement of the critical pitting potential of aluminium. Corrosion Science. 18(9): 835-849.
  • [2] Wang, J., Zhou, X., Thompson, G.E., Hunter, J.A., Yuan, Y. (2015). Near-surface microstructure on twin-roll cast 8906 aluminum alloy. Metallurgical and Materials Transactions A. 46(6): 26882695.
  • [3] Rahimi, M., Fojan, P., Gurevich, L., Afshari, A. (2015). Aluminium alloy 8011: Surface characteristics. in Applied Mechanics and Materials. 2015. Trans Tech Publ.
  • [4] Sanders, R. E. (2012). Continuous casting for aluminum sheet: a product perspective. JOM. 64(2): 291-301.
  • [5] Okeoma Kelechukwu, B., Owate Israel, O., Oguzie Emeka, E., Mejeha Ihebrodike, M. (2012). Effects of Heat Treatment on the Electrochemical Corrosion Behaviour of Aluminum Alloy AA8011 in 0.1 M H2SO4 Aqueous Acid Media.
  • [6] Barekar, N., Dhindaw, B. (2014). Twin-roll casting of aluminum alloys–an overview. Materials and Manufacturing Processes. 29(6): 651-661.
  • [7] Davis, J.R. (1999). Corrosion of aluminum and aluminum alloys. Asm International.
  • [8] Park, S.-A., Kim, J., He, Y., Shin, K., Yoon, J. (2014). Comparative study on the corrosion behavior of the cold rolled and hot rolled low-alloy steels containing copper and antimony in flue gas desulfurization environment. The Physics of Metals and Metallography. 115(13): 1285-1294.
  • [9] Kurt, K., Diplas, S., Walmsley, J.C., Nisancioglu, K. (2013). Effect of Trace Elements Lead and Tin on Anodic Activation of AA8006 Aluminum Sheet. Journal of The Electrochemical Society. 160(11): C542-C552.
  • [10] Kucuk, İ . (2018). Effect of Cold Rolling Reduction Rate on Corrosion Behaviour of Twin-roll Cast 8006 Aluminium Alloys. Cumhuriyet Science Journal, 39 (1): 233-242.
  • [11] van der Merwe, J., Palazzo, A. (2015). Comparison of linear polarization resistance corrosion monitoring probe readings and immersion test results for typical cooling water conditions. Journal of the Southern African Institute of Mining and Metallurgy. 115(3): 173-178.
  • [12] Zou, Y., Wang, J., Zheng, Y. (2011). Electrochemical techniques for determining corrosion rate of rusted steel in seawater. Corrosion Science. 53(1): 208-216.
  • [13] Stern, M. (1958). A method for determining corrosion rates from linear polarization data. Corrosion. 14(9): 60-64.
Toplam 13 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Research Articles
Yazarlar

Taha Yasin Eken

Cevat Sarıoğlu

İsrafil Küçük

Yayımlanma Tarihi 20 Haziran 2018
Yayımlandığı Sayı Yıl 2018Cilt: 2 Sayı: 1

Kaynak Göster

APA Eken, T. Y., Sarıoğlu, C., & Küçük, İ. (2018). Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution. Journal of Innovative Science and Engineering, 2(1), 19-24.
AMA Eken TY, Sarıoğlu C, Küçük İ. Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution. JISE. Haziran 2018;2(1):19-24.
Chicago Eken, Taha Yasin, Cevat Sarıoğlu, ve İsrafil Küçük. “Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution”. Journal of Innovative Science and Engineering 2, sy. 1 (Haziran 2018): 19-24.
EndNote Eken TY, Sarıoğlu C, Küçük İ (01 Haziran 2018) Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution. Journal of Innovative Science and Engineering 2 1 19–24.
IEEE T. Y. Eken, C. Sarıoğlu, ve İ. Küçük, “Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution”, JISE, c. 2, sy. 1, ss. 19–24, 2018.
ISNAD Eken, Taha Yasin vd. “Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution”. Journal of Innovative Science and Engineering 2/1 (Haziran 2018), 19-24.
JAMA Eken TY, Sarıoğlu C, Küçük İ. Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution. JISE. 2018;2:19–24.
MLA Eken, Taha Yasin vd. “Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution”. Journal of Innovative Science and Engineering, c. 2, sy. 1, 2018, ss. 19-24.
Vancouver Eken TY, Sarıoğlu C, Küçük İ. Comparison of Tafel Extrapolation and Linear Polarization Resistance Readings for TRC 8006 Aluminium Alloys in 3.5 wt.% NaCI Aqueous Solution. JISE. 2018;2(1):19-24.


Creative Commons License

The works published in Journal of Innovative Science and Engineering (JISE) are licensed under a  Creative Commons Attribution-NonCommercial 4.0 International License.