Araştırma Makalesi
BibTex RIS Kaynak Göster

Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance

Yıl 2017, Cilt: 17 Sayı: 2, 3369 - 3375, 27.07.2017

Öz

In this study, the optimum
design of a BLDC motor which is used for in-wheel light electric vehicle
propulsion is presented. The optimization work is mainly based on different
slot-pole numbers which give a substantial performance for that certain
application. An outer rotor, 2.5kW, 150V BLDC motor which is widely implemented
in light electric vehicle traction is selected. Finite Element Analysis (FEA)
is of the target motor design is conducted for various slot-pole combinations.
By using the captured design data, the optimized motor is manufactures and
tested. The test and simulation results are compared in order to investigate
the optimization approach

Kaynakça

  • O. Ustun, M. Yilmaz, C. Gokce, U. Karakaya, and R. N. Tuncay, “Energy Management Method for Solar Race Car Design and Application”, IEEE International Electric Machines and Drives Conference, Florida-USA, 2009, pp. 804- 811.
  • L. Tutelea, and I. Boldea, “Optimal Design of Residential Brushless D.C. Permanent Magnet Motors with FEM Validation”, Aegean Conference on Electric Machines, Power Electronics and Electromotion (ACEMP '07), Bodrum, Turkey, 2007, pp. 435-439.
  • A.S. Cabuk, S. Saglam, G. Tosun, and O. Ustun, “Investigation of Different Slot-Pole Combinations of An In-Wheel BLDC Motor for Light Electric Vehicle Propulsion”, National Conference on Electrical, Electronics and Biomedical Engineering (ELECO 2016), Bursa-Turkey, 2016, pp. 298–302.
  • D. Zarko, D. Ban, and T.A. Lipo, “Analytical Solution for Cogging Torque in Surface Permanent-Magnet Motors Using Conformal Mapping”, IEEE Transactions on Magnetics, 44(1), pp. 52-64, December, 2007.
  • R.N. Tuncay, O. Ustun, M. Yılmaz, C. Gökce, and U. Karakaya, “Design And Implementation Of An Electric Drive System For In-Wheel Motor Electric Vehicle Applications”, 7th IEEE Vehicle Power and Propulsion Conference (VPPC’11), Chicago-USA, 2011, pp. 1-6.
  • L. Zhao, C. Ham, L. Zheng, T. Wu, K. Sundaram, J. Kapat, and L. Chow, “A Highly Efficient 200000 Rpm Permanent Magnet Motor System”. IEEE Transactions on Magnetics, 43(6), pp. 2528-2530, June, 2007.
  • M. Markovic, A. Hodder, and Y. Perriard, “An Analytical Determination of The Torque–Speed and Efficiency–Speed Characteristics of a BLDC Motor”, Energy Conversion Congress and Exposition (ECCE 2009), San Jose-CA-USA, 2009, pp. 168-172.
  • S.S. Nair, S. Nalakath, and S.J. Dhinagar, “Design and Analysis of Axial Flux Permanent Magnet BLDC Motor for Automotive Applications”, IEEE International Electric Machines & Drives Conference (IEMDC’11), Ontario-Canada, 2011, pp. 1615-1618.
  • D. Zarko, D. Ban, and T.A. Lipo, “Analytical Calculation of Magnetic Field Distribution in the Slotted Air Gap of a Surface Permanent-Magnet Motor Using Complex Relative Air-Gap Permeance”, IEEE Transactions on Magnetics, 42(7), pp. 1828-1837, July, 2006.
  • S.J. Park, H.W. Park, M.H. Lee, and F. Harashima, “A New Approach For Minimum-Torque-Ripple Maximum- Efficiency Control of Bldc Motor”, IEEE Transactions on Industrial Electronics, 47(1), pp. 109-114, Feb, 2000.
  • N.A. Rahim, H.W. Hew Wooi Ping, and M. Tadjuddin, “Design of Axial Flux Permanent Magnet Brushless DC Motor for Direct Drive of Electric Vehicle”, IEEE Power Engineering Society General Meeting, Tampa-FL-USA, 2007, pp. 1-6.
  • M.M. Rahman, K. Kim, and J. Hur “Design and Optimization of Neodymium-Free SPOKE-Type Motor With Segmented Wing-Shaped PM”, IEEE Transactions On Magnetics, 50(2), pp. 68-76, Feb, 2014.
  • A. Adnan, and D. Ishak, “Finite Element Modeling and Analysis of External Rotor Brushless DC Motor for Electric Bicycle”, Proceedings of 2009 IEEE Student Conference on Research and Development (SCOReD’09), Serdang-Malaysia, 2009, pp. 376-379.
Yıl 2017, Cilt: 17 Sayı: 2, 3369 - 3375, 27.07.2017

Öz

Kaynakça

  • O. Ustun, M. Yilmaz, C. Gokce, U. Karakaya, and R. N. Tuncay, “Energy Management Method for Solar Race Car Design and Application”, IEEE International Electric Machines and Drives Conference, Florida-USA, 2009, pp. 804- 811.
  • L. Tutelea, and I. Boldea, “Optimal Design of Residential Brushless D.C. Permanent Magnet Motors with FEM Validation”, Aegean Conference on Electric Machines, Power Electronics and Electromotion (ACEMP '07), Bodrum, Turkey, 2007, pp. 435-439.
  • A.S. Cabuk, S. Saglam, G. Tosun, and O. Ustun, “Investigation of Different Slot-Pole Combinations of An In-Wheel BLDC Motor for Light Electric Vehicle Propulsion”, National Conference on Electrical, Electronics and Biomedical Engineering (ELECO 2016), Bursa-Turkey, 2016, pp. 298–302.
  • D. Zarko, D. Ban, and T.A. Lipo, “Analytical Solution for Cogging Torque in Surface Permanent-Magnet Motors Using Conformal Mapping”, IEEE Transactions on Magnetics, 44(1), pp. 52-64, December, 2007.
  • R.N. Tuncay, O. Ustun, M. Yılmaz, C. Gökce, and U. Karakaya, “Design And Implementation Of An Electric Drive System For In-Wheel Motor Electric Vehicle Applications”, 7th IEEE Vehicle Power and Propulsion Conference (VPPC’11), Chicago-USA, 2011, pp. 1-6.
  • L. Zhao, C. Ham, L. Zheng, T. Wu, K. Sundaram, J. Kapat, and L. Chow, “A Highly Efficient 200000 Rpm Permanent Magnet Motor System”. IEEE Transactions on Magnetics, 43(6), pp. 2528-2530, June, 2007.
  • M. Markovic, A. Hodder, and Y. Perriard, “An Analytical Determination of The Torque–Speed and Efficiency–Speed Characteristics of a BLDC Motor”, Energy Conversion Congress and Exposition (ECCE 2009), San Jose-CA-USA, 2009, pp. 168-172.
  • S.S. Nair, S. Nalakath, and S.J. Dhinagar, “Design and Analysis of Axial Flux Permanent Magnet BLDC Motor for Automotive Applications”, IEEE International Electric Machines & Drives Conference (IEMDC’11), Ontario-Canada, 2011, pp. 1615-1618.
  • D. Zarko, D. Ban, and T.A. Lipo, “Analytical Calculation of Magnetic Field Distribution in the Slotted Air Gap of a Surface Permanent-Magnet Motor Using Complex Relative Air-Gap Permeance”, IEEE Transactions on Magnetics, 42(7), pp. 1828-1837, July, 2006.
  • S.J. Park, H.W. Park, M.H. Lee, and F. Harashima, “A New Approach For Minimum-Torque-Ripple Maximum- Efficiency Control of Bldc Motor”, IEEE Transactions on Industrial Electronics, 47(1), pp. 109-114, Feb, 2000.
  • N.A. Rahim, H.W. Hew Wooi Ping, and M. Tadjuddin, “Design of Axial Flux Permanent Magnet Brushless DC Motor for Direct Drive of Electric Vehicle”, IEEE Power Engineering Society General Meeting, Tampa-FL-USA, 2007, pp. 1-6.
  • M.M. Rahman, K. Kim, and J. Hur “Design and Optimization of Neodymium-Free SPOKE-Type Motor With Segmented Wing-Shaped PM”, IEEE Transactions On Magnetics, 50(2), pp. 68-76, Feb, 2014.
  • A. Adnan, and D. Ishak, “Finite Element Modeling and Analysis of External Rotor Brushless DC Motor for Electric Bicycle”, Proceedings of 2009 IEEE Student Conference on Research and Development (SCOReD’09), Serdang-Malaysia, 2009, pp. 376-379.
Toplam 13 adet kaynakça vardır.

Ayrıntılar

Konular Mühendislik
Bölüm Makaleler
Yazarlar

Ali Sinan Çabuk

Şafak Sağlam

Özgür Üstün

Yayımlanma Tarihi 27 Temmuz 2017
Yayımlandığı Sayı Yıl 2017 Cilt: 17 Sayı: 2

Kaynak Göster

APA Çabuk, A. S., Sağlam, Ş., & Üstün, Ö. (2017). Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance. IU-Journal of Electrical & Electronics Engineering, 17(2), 3369-3375.
AMA Çabuk AS, Sağlam Ş, Üstün Ö. Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance. IU-Journal of Electrical & Electronics Engineering. Temmuz 2017;17(2):3369-3375.
Chicago Çabuk, Ali Sinan, Şafak Sağlam, ve Özgür Üstün. “Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance”. IU-Journal of Electrical & Electronics Engineering 17, sy. 2 (Temmuz 2017): 3369-75.
EndNote Çabuk AS, Sağlam Ş, Üstün Ö (01 Temmuz 2017) Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance. IU-Journal of Electrical & Electronics Engineering 17 2 3369–3375.
IEEE A. S. Çabuk, Ş. Sağlam, ve Ö. Üstün, “Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance”, IU-Journal of Electrical & Electronics Engineering, c. 17, sy. 2, ss. 3369–3375, 2017.
ISNAD Çabuk, Ali Sinan vd. “Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance”. IU-Journal of Electrical & Electronics Engineering 17/2 (Temmuz 2017), 3369-3375.
JAMA Çabuk AS, Sağlam Ş, Üstün Ö. Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance. IU-Journal of Electrical & Electronics Engineering. 2017;17:3369–3375.
MLA Çabuk, Ali Sinan vd. “Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance”. IU-Journal of Electrical & Electronics Engineering, c. 17, sy. 2, 2017, ss. 3369-75.
Vancouver Çabuk AS, Sağlam Ş, Üstün Ö. Impact of Various Slot-Pole Combinations on an In-Wheel BLDC Motor Performance. IU-Journal of Electrical & Electronics Engineering. 2017;17(2):3369-75.