Öz
Kaynakça
- [1] Hüner E, Ataözden Y. Küçük güçlü rüzgar türbinleri için 3d sey programı ile ipms alternatörün elektromanyetik tasarımı ve analizi, Kırklareli Universitesi Mühendislik ve Fen Bilimleri Dergisi, 2016; 2: 60-73.
- [2] Miller T. Brushless permanent-magnet and reluctance motor drives, New York: Oxford University Press, 1989.
- [3]Lee J, Kim D, Song J, Jung S, Kim Y. Design of 100kW propulsion motor for electric conversion vehicle based on vehicle driving performance simulation, IEEE Transportation Electrification Conference and Expo, Busan-Korea (South), 2016.
- [4] Ayçiçek E, Bekiroğlu N, Şenol İ. Optimization of rotor structure for providing minimum cogging torque by using open slot method in axial flux permanent magnet motors, Journal of Engineering and Natural Sciences, 2012; 212: 392-401.
- [5] https://www.emo.org.tr/ekler/acc8e85c11092da_ek.pdf Erişim online: 29.10.2021
- [6] Tejas H, Panchal RM, Patel AN. Patel, Efficiency improvement of radial flux permanent magnet brushless DC motor using hiperco magnetic material, International Journal of Engineering Trends and Technology, Volume 2021; 5: 57-61.
- [7] Toda H, Oda Y, Kohno M, Ishida M, Zaizen Y. A new high flux density non-oriented electrical steel sheet and its motor performance, in IEEE Transactions on Magnetics, 2012.
- [8] Kolano R, Krykowski K, Kolano-Burian A, Polak M, Szynowski J, Zackiewicz P. Amorphous soft magnetic materials for the stator of a novel high-speed PMBLDC motor, in IEEE Transactions on Magnetics, 2013.
- [9] Ishikawa T, Takahashi K, Ho QV, Matsunami M, Kurita N. Analysis of novel brushless DC motors made of soft magnetic composite core, in IEEE Transactions on Magnetics, 2012.
Öz
It is seen that the use of wind energy as a renewable energy source in the world has increased recently. In addition to this, power plants are established for the production of high power electricity and the energy produced is given to the grid. However, in a region far from the urban area, electrical energy can be produced at small power levels. Radial flux permanent magnet alternators are the most widely used to generate electrical energy at small powers. Therefore, in this study, the effect on the efficiency of the materials used in radial flux permanent magnet alternators was investigated. Time savings can be achieved by analyzing the alternators used for the energy to be produced. The analyzes taken from the program contribute to the studies and may cause small deviations in real applications. In our study, considering the B-H characteristics of ferromagnetic materials, the effects of variable stator, rotor and magnet materials on the output performance were examined and comparisons were made by choosing the configuration with the best efficiency as a result of the optimization made. According to the graphical results obtained, time and cost savings were achieved.
Anahtar Kelimeler
Radial flux permanent magnet alternators Renewable energy Ferromagnetic material
Kaynakça
- [1] Hüner E, Ataözden Y. Küçük güçlü rüzgar türbinleri için 3d sey programı ile ipms alternatörün elektromanyetik tasarımı ve analizi, Kırklareli Universitesi Mühendislik ve Fen Bilimleri Dergisi, 2016; 2: 60-73.
- [2] Miller T. Brushless permanent-magnet and reluctance motor drives, New York: Oxford University Press, 1989.
- [3]Lee J, Kim D, Song J, Jung S, Kim Y. Design of 100kW propulsion motor for electric conversion vehicle based on vehicle driving performance simulation, IEEE Transportation Electrification Conference and Expo, Busan-Korea (South), 2016.
- [4] Ayçiçek E, Bekiroğlu N, Şenol İ. Optimization of rotor structure for providing minimum cogging torque by using open slot method in axial flux permanent magnet motors, Journal of Engineering and Natural Sciences, 2012; 212: 392-401.
- [5] https://www.emo.org.tr/ekler/acc8e85c11092da_ek.pdf Erişim online: 29.10.2021
- [6] Tejas H, Panchal RM, Patel AN. Patel, Efficiency improvement of radial flux permanent magnet brushless DC motor using hiperco magnetic material, International Journal of Engineering Trends and Technology, Volume 2021; 5: 57-61.
- [7] Toda H, Oda Y, Kohno M, Ishida M, Zaizen Y. A new high flux density non-oriented electrical steel sheet and its motor performance, in IEEE Transactions on Magnetics, 2012.
- [8] Kolano R, Krykowski K, Kolano-Burian A, Polak M, Szynowski J, Zackiewicz P. Amorphous soft magnetic materials for the stator of a novel high-speed PMBLDC motor, in IEEE Transactions on Magnetics, 2013.
- [9] Ishikawa T, Takahashi K, Ho QV, Matsunami M, Kurita N. Analysis of novel brushless DC motors made of soft magnetic composite core, in IEEE Transactions on Magnetics, 2012.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Elektrik Mühendisliği |
| Bölüm | Research Article |
| Yazarlar | |
| Yayımlanma Tarihi | 24 Mart 2023 |
| Gönderilme Tarihi | 26 Şubat 2023 |
| Kabul Tarihi | 10 Mart 2023 |
| Yayımlandığı Sayı | Yıl 2023 Cilt: 8 Sayı: 1 |
