Derleme
BibTex RIS Kaynak Göster

Tekstil Endüstrisinde Kullanılan İnkjet Baskı Mürekkepleri

Yıl 2023, Cilt: 10 Sayı: 2, 430 - 444, 30.11.2023
https://doi.org/10.35193/bseufbd.1146103

Öz

Geleneksel baskının uzun üretim prosesleri, yüksek enerji ve su kullanımı, geniş depolama alanı gerektirmesi, çevre kirliliği gibi olumsuz etkileri sebebiyle son yıllarda dijital baskı ön plana çıkmaktadır. Bununla birlikte dijital baskı proseslerinde geliştirilmesi gereken teknik kısıtlamalar da bulunmaktadır. Kumaş türü, kullanılan mürekkebin formülasyonu, ön işlemler ve ard işlemler gibi faktörler baskının son halinde renk farklılıklarına sebep olarak sorun teşkil edebilmektedir. Özellikle baskı kalitesi ve püskürtme özelliklerini doğrudan etkilemesi nedeni ile dijital baskı mürekkepleri dijital baskının en önemli bileşenlerinden biridir. Mürekkeplerin sahip olması gereken bazı özellikler bulunmaktadır ve bu özellikler tıkanmayı önleyebilmek için baskı kafasının çalışma prensibine uygun olmalıdır. Baskı mürekkeplerinde bulunması gereken temel özellikler; saflık, parçacık boyutu, viskozite, yüzey gerilimi, stabilite, iletkenlik, pH, renk haslıkları olarak kısaca özetlenebilir. Bu çalışmada, baskı mürekkeplerinin genel özellikleri, formülasyonları, çeşitli ön işlemler ve kullanılan renklendiricilere göre karşılaşılan teknik kısıtlamalar anlatılmaktadır.

Kaynakça

  • Ding, Y., Zhendong, W., Chuanxiong, Z., Ruobai, X., & Wenliang, X. (2021). A study on the applicability of pigment digital printing on cotton fabrics. Textile Research Journal, 91(19-20), 2283-2293.
  • Çetin, M. (2019). Protein liflerinin baskısında ink jet baskı teknolojisinin kullanımı (Master's thesis, Pamukkale Üniversitesi Fen Bilimleri Enstitüsü).
  • Daplyn, S., & Lin, L. (2003). Evaluation of pigmented ink formulations for jet printing onto textile fabrics. Pigment & resin technology.
  • Kalav, B. (2012). Pamuklu Kumaşların İnk Jet Baskısında Bilgi Tabanlı Uzman Sistem Kullanarak Problem Belirleme Ve Giderme (Doctoral dissertation, Fen Bilimleri Enstitüsü).
  • Selçuk, E. (2009). Ink jet baskıda kumaşa uygulanan ön işlemlerin baskı kalitesi üzerine etkilerinin araştırılması (Master's thesis, Uludağ Üniversitesi).
  • Ütebay, B. (2010). Pamuklu Kumaşlara Uygulanan Ink-Jet Baskı İşleminde Renk Verimine Etki Eden Faktörlerin İncelenmesi. Ege University Institute of Natural and Applied Sciences Department of Textile Engineering Master Thesis, İzmir.
  • Texintel, “New developments for digital textile printing inks-sustainable inks and super fast roduction”, 30 Mart 2023, https://www.texintel.com/blog/2021/2/17/new-developments-for-digital-textile-printing-inks-green-inks-and-super-fast-production.
  • Ding, Y., Shamey, R., Chapman, L. P., & Freeman, H. S. (2019). Pretreatment effects on pigment‐based textile inkjet printing–colour gamut and crockfastness properties. Coloration Technology, 135(1), 77-86.
  • Provost, J. (2011). The Textile printing industry changing the future market dynamics with digital textile printing. The Colorist, (3), 4-6.
  • Kalav, B. (2012). Troubleshooting Ink Jet Printing of Cotton Substrates Usind A Knowledge-Based Expert System. Istanbul Technical University.
  • Özgüney, A. T., & Erdem İşmal, Ö. (2003). Tekstil Dijital (Inkjet) Baskı Teknolojisi Temel İlkeleri ve GeliĢim Süreci. Türk Tekstil Vakfı Yayınları, İzmir, 48-52.
  • Blank, K. H., Chassagne, J. M., & Reddig, W. (2004). Colorants in digital textile printing inks. Textile Ink Jet Printing, Society of Dyers and Colourists, Bradford, 64-68.
  • Le, H. P. (1998). Progress and trends in ink-jet printing technology. Journal of Imaging Science and Technology, 42(1), 49-62.
  • Tyler, D. J. (2005). Textile digital printing technologies. Textile Progress, 37(4), 1-65.
  • Tawiah, B., Howard, E. K., & Asinyo, B. K. (2016). The chemistry of inkjet inks for digital textile printing—Review. BEST, 4, 61-78.
  • Ujiie, H. (Ed.). (2006). Digital printing of textiles. Woodhead Publishing.
  • Śmigiel-Kamińska, D., Wąs-Gubała, J., Stepnowski, P., & Kumirska, J. (2020). The identification of cotton fibers dyed with reactive dyes for forensic purposes. Molecules, 25(22), 5435.
  • Pal, P. (2017). Industrial water treatment process technology. Butterworth-Heinemann.
  • Soleimani-Gorgani, A., & Karami, Z. (2016). The effect of biodegradable organic acids on the improvement of cotton ink-jet printing and antibacterial activity. Fibers and Polymers, 17, 512-520.
  • Wardman, R. H. (2017). An introduction to textile coloration: principles and practice. John Wiley & Sons.
  • Kan, C. W., & Yuen, C. W. M. (2012). Digital ink-jet printing on textiles. Research Journal of Textile and Apparel.
  • Faisal, S., Ali, M., Siddique, S. H., & Lin, L. (2021). Inkjet printing of silk: Factors influencing ink penetration and ink spreading. Pigment & Resin Technology, 50(4), 285-292.
  • Kulube, H. M., & Hawkyard, C. J. (1996). Fabric Pretreatments and Inks for Textile Ink Jet Printing. ITB Dyeing/Printing/Finishing, 3, 4-15.
  • Yuen, C. W. M., Ku, S. K. A., Choi, P. S., & Kan, C. W. (2004). The effect of the pretreatment print paste contents on colour yield of an inkjet printed cotton fabric. Fibers and Polymers, 5(2), 117-121.
  • Mathur, A., & Sand, P. M. (2006). Textile print-paste thickeners from polysaccharides. Science Tech Entrepreneur.
  • Choi, P. S. R., Yuen, C. W. M., Ku, S. K. A., & Kan, C. W. (2005). Digital ink-jet printing for chitosan-treated cotton fabric. Fibers and Polymers, 6(3), 229-234.
  • Ahmed, N. S., Youssef, Y. A., El‐Shishtawy, R. M., & Mousa, A. A. (2006). Urea/alkali‐free printing of cotton with reactive dyes. Coloration technology, 122(6), 324-328.
  • Hou, X., Chen, G., Xing, T., & Wei, Z. (2019). Reactive ink formulated with various alcohols for improved properties and printing quality onto cotton fabrics. Journal of Engineered Fibers and Fabrics, 14, 1558925019849242.
  • Ma, W., Shen, K., Li, S., Zhan, M., & Zhang, S. (2017). One-bath pretreatment for enhanced color yield of ink-jet prints using reactive inks. Molecules, 22(11), 1959.
  • Soleimani-Gorgani, A., Najafi, F., & Karami, Z. (2015). Modification of cotton fabric with a dendrimer to improve ink-jet printing process. Carbohydrate polymers, 131, 168-176.
  • Gregory, P., 2004, SDC Technical Monograph - Textile Ink Jet Printing, 1st Edition, Society of Dyers and Colorists, England.
  • Adeel, S., Razzaq, A., Kiran, S., Ahmad, T., Hassan, A., & Rehman, H. U. (2022). A comparative study on sustainable dyeing of silk and wool with acid red 138 dye. Journal of Natural Fibers, 19(14), 8181-8190.
  • Yang, Y., & Li, S. (2003). Cotton fabric inkjet printing with acid dyes. Textile research journal, 73(9), 809-814.
  • Hauser, P. J., & Kanik, M. (2003). Printing of Cationized Cotton with Acid Dyes. AATCC review, 3(3).
  • [35] Musa, H., Abdulmumini, A., Folashade, M. O., Usman, B., & Abba, H. (2013). Studies on the dyeing of wool and nylon fabrics with some acid dyes. IOSR J. Appl. Chem, 5(1), 11-17.
  • Choi, S., Cho, K. H., Namgoong, J. W., Kim, J. Y., Yoo, E. S., Lee, W., ... & Choi, J. (2019). The synthesis and characterisation of the perylene acid dye inks for digital textile printing. Dyes and Pigments, 163, 381-392.
  • Hajipour, A., & Shams-Nateri, A. (2017). The effect of fabric density on the quality of digital printing on polyester. Fibers and Polymers, 18, 2462-2468.
  • Ibrahim, D., & Abd El-Salam, S. H. (2012). Enzymatic treatment of polyester fabrics digitally printed. J Text Sci Eng, 2, 1-4.
  • Fu, S., Zhang, G., Du, C., & Tian, A. (2011). Preparation of encapsulated disperse dye dispersion for polyester inkjet printing ink. Journal of Applied Polymer Science, 121(3), 1616-1621.
  • Sinclair, R. (Ed.). (2014). Textiles and fashion: materials, design and technology. Elsevier.
  • Khan, M. R. (2016). Pigment ink formulation, tests and test methods for pigmented textile inks. Chemistry and Materials Research, 8(8), 78-86.
  • Elgammal, M., Schneider, R., & Gradzielski, M. (2016). Development of self-curable hybrid pigment inks by miniemulsion polymerization for inkjet printing of cotton fabrics. Dyes and Pigments, 133, 467-478.
  • Marie, M. M., El-Hamaky, Y. H., Maamoun, D., Ibrahim, D. F., & Abbas, S. M. (2013). Pigment ink formulation for inkjet printing of different textile materials. International Journal of Innovation and Applied Studies, 4(1), 239-247.
  • Leelajariyakul, S., Noguchi, H., & Kiatkamjornwong, S. (2008). Surface-modified and micro-encapsulated pigmented inks for ink jet printing on textile fabrics. Progress in Organic Coatings, 62(2), 145-161.
  • Kangwansupamonkon, W., Suknithipol, M., Phattanarudee, S., & Kiatkamjornwong, S. (2011). Inkjet printing: effects of binder particle size and chitosan pretreatment on the qualities of silk fabric. Surf Coat Int, 94, 216-225.
  • Shen, Q., Chen, S., Wang, C., Liu, C., & Tian, A. (2014). A foam single-face pretreatment to modify silk fabric using EBODAC to improve inkjet printing performance. The Journal of the Textile Institute, 105(8), 799-805.
  • Fang, K., Wang, S., Wang, C., & Tian, A. (2008). Inkjet printing effects of pigment inks on silk fabrics surfacemodified with O2 plasma. Journal of Applied Polymer Science, 107(5), 2949-2955.
  • Gao, C., Xing, T., Hou, X., & Chen, G. (2019). Preparation of disperse inks for direct inkjet printing of non-pretreated polyester fabrics. RSC advances, 9(34), 19791-19799.
  • Tse, M. K., Briggs, J. C., Kim, Y. K., & Lewis, A. F. (1998). Measuring print quality of digitally printed textiles. Recent progress in ink jet technologies II, 548-612.
  • Liao, S. K., Chen, H. Y., & Kan, C. W. (2009). A Study of Quality Factors for Cotton Fabrics in Ink-Jet Printing. Research Journal of Textile and Apparel.

Inkjet Printing Inks Used in Textile Industry

Yıl 2023, Cilt: 10 Sayı: 2, 430 - 444, 30.11.2023
https://doi.org/10.35193/bseufbd.1146103

Öz

Digital printing has become to the prominent in recent years due to the negative effects of traditional printing, such as long production processes, usage of high energy and water, large storage space, and environmental pollution. However, there are also technical limitations that need to be developed in digital printing processes. Changes such as the type of fabric, the formulation of the ink used, pre-treatments and post-treatments can cause color differences in the final print and other problems. Digital printing inks are one of the most important components of digital printing, especially since they directly affect the printing quality and jetting properties. There are some features that inks must have, and these features should be in accordance with the working principle of the printhead in order to prevent clogging. The basic properties that should be found in ink jet printing inks are: purity, particle size, viscosity, surface tension, stability, conductivity, pH, color fastness. In this study, the general properties of printing inks, their formulations, various pre-treatments, and technical limitations according to the colorants used are explained.

Kaynakça

  • Ding, Y., Zhendong, W., Chuanxiong, Z., Ruobai, X., & Wenliang, X. (2021). A study on the applicability of pigment digital printing on cotton fabrics. Textile Research Journal, 91(19-20), 2283-2293.
  • Çetin, M. (2019). Protein liflerinin baskısında ink jet baskı teknolojisinin kullanımı (Master's thesis, Pamukkale Üniversitesi Fen Bilimleri Enstitüsü).
  • Daplyn, S., & Lin, L. (2003). Evaluation of pigmented ink formulations for jet printing onto textile fabrics. Pigment & resin technology.
  • Kalav, B. (2012). Pamuklu Kumaşların İnk Jet Baskısında Bilgi Tabanlı Uzman Sistem Kullanarak Problem Belirleme Ve Giderme (Doctoral dissertation, Fen Bilimleri Enstitüsü).
  • Selçuk, E. (2009). Ink jet baskıda kumaşa uygulanan ön işlemlerin baskı kalitesi üzerine etkilerinin araştırılması (Master's thesis, Uludağ Üniversitesi).
  • Ütebay, B. (2010). Pamuklu Kumaşlara Uygulanan Ink-Jet Baskı İşleminde Renk Verimine Etki Eden Faktörlerin İncelenmesi. Ege University Institute of Natural and Applied Sciences Department of Textile Engineering Master Thesis, İzmir.
  • Texintel, “New developments for digital textile printing inks-sustainable inks and super fast roduction”, 30 Mart 2023, https://www.texintel.com/blog/2021/2/17/new-developments-for-digital-textile-printing-inks-green-inks-and-super-fast-production.
  • Ding, Y., Shamey, R., Chapman, L. P., & Freeman, H. S. (2019). Pretreatment effects on pigment‐based textile inkjet printing–colour gamut and crockfastness properties. Coloration Technology, 135(1), 77-86.
  • Provost, J. (2011). The Textile printing industry changing the future market dynamics with digital textile printing. The Colorist, (3), 4-6.
  • Kalav, B. (2012). Troubleshooting Ink Jet Printing of Cotton Substrates Usind A Knowledge-Based Expert System. Istanbul Technical University.
  • Özgüney, A. T., & Erdem İşmal, Ö. (2003). Tekstil Dijital (Inkjet) Baskı Teknolojisi Temel İlkeleri ve GeliĢim Süreci. Türk Tekstil Vakfı Yayınları, İzmir, 48-52.
  • Blank, K. H., Chassagne, J. M., & Reddig, W. (2004). Colorants in digital textile printing inks. Textile Ink Jet Printing, Society of Dyers and Colourists, Bradford, 64-68.
  • Le, H. P. (1998). Progress and trends in ink-jet printing technology. Journal of Imaging Science and Technology, 42(1), 49-62.
  • Tyler, D. J. (2005). Textile digital printing technologies. Textile Progress, 37(4), 1-65.
  • Tawiah, B., Howard, E. K., & Asinyo, B. K. (2016). The chemistry of inkjet inks for digital textile printing—Review. BEST, 4, 61-78.
  • Ujiie, H. (Ed.). (2006). Digital printing of textiles. Woodhead Publishing.
  • Śmigiel-Kamińska, D., Wąs-Gubała, J., Stepnowski, P., & Kumirska, J. (2020). The identification of cotton fibers dyed with reactive dyes for forensic purposes. Molecules, 25(22), 5435.
  • Pal, P. (2017). Industrial water treatment process technology. Butterworth-Heinemann.
  • Soleimani-Gorgani, A., & Karami, Z. (2016). The effect of biodegradable organic acids on the improvement of cotton ink-jet printing and antibacterial activity. Fibers and Polymers, 17, 512-520.
  • Wardman, R. H. (2017). An introduction to textile coloration: principles and practice. John Wiley & Sons.
  • Kan, C. W., & Yuen, C. W. M. (2012). Digital ink-jet printing on textiles. Research Journal of Textile and Apparel.
  • Faisal, S., Ali, M., Siddique, S. H., & Lin, L. (2021). Inkjet printing of silk: Factors influencing ink penetration and ink spreading. Pigment & Resin Technology, 50(4), 285-292.
  • Kulube, H. M., & Hawkyard, C. J. (1996). Fabric Pretreatments and Inks for Textile Ink Jet Printing. ITB Dyeing/Printing/Finishing, 3, 4-15.
  • Yuen, C. W. M., Ku, S. K. A., Choi, P. S., & Kan, C. W. (2004). The effect of the pretreatment print paste contents on colour yield of an inkjet printed cotton fabric. Fibers and Polymers, 5(2), 117-121.
  • Mathur, A., & Sand, P. M. (2006). Textile print-paste thickeners from polysaccharides. Science Tech Entrepreneur.
  • Choi, P. S. R., Yuen, C. W. M., Ku, S. K. A., & Kan, C. W. (2005). Digital ink-jet printing for chitosan-treated cotton fabric. Fibers and Polymers, 6(3), 229-234.
  • Ahmed, N. S., Youssef, Y. A., El‐Shishtawy, R. M., & Mousa, A. A. (2006). Urea/alkali‐free printing of cotton with reactive dyes. Coloration technology, 122(6), 324-328.
  • Hou, X., Chen, G., Xing, T., & Wei, Z. (2019). Reactive ink formulated with various alcohols for improved properties and printing quality onto cotton fabrics. Journal of Engineered Fibers and Fabrics, 14, 1558925019849242.
  • Ma, W., Shen, K., Li, S., Zhan, M., & Zhang, S. (2017). One-bath pretreatment for enhanced color yield of ink-jet prints using reactive inks. Molecules, 22(11), 1959.
  • Soleimani-Gorgani, A., Najafi, F., & Karami, Z. (2015). Modification of cotton fabric with a dendrimer to improve ink-jet printing process. Carbohydrate polymers, 131, 168-176.
  • Gregory, P., 2004, SDC Technical Monograph - Textile Ink Jet Printing, 1st Edition, Society of Dyers and Colorists, England.
  • Adeel, S., Razzaq, A., Kiran, S., Ahmad, T., Hassan, A., & Rehman, H. U. (2022). A comparative study on sustainable dyeing of silk and wool with acid red 138 dye. Journal of Natural Fibers, 19(14), 8181-8190.
  • Yang, Y., & Li, S. (2003). Cotton fabric inkjet printing with acid dyes. Textile research journal, 73(9), 809-814.
  • Hauser, P. J., & Kanik, M. (2003). Printing of Cationized Cotton with Acid Dyes. AATCC review, 3(3).
  • [35] Musa, H., Abdulmumini, A., Folashade, M. O., Usman, B., & Abba, H. (2013). Studies on the dyeing of wool and nylon fabrics with some acid dyes. IOSR J. Appl. Chem, 5(1), 11-17.
  • Choi, S., Cho, K. H., Namgoong, J. W., Kim, J. Y., Yoo, E. S., Lee, W., ... & Choi, J. (2019). The synthesis and characterisation of the perylene acid dye inks for digital textile printing. Dyes and Pigments, 163, 381-392.
  • Hajipour, A., & Shams-Nateri, A. (2017). The effect of fabric density on the quality of digital printing on polyester. Fibers and Polymers, 18, 2462-2468.
  • Ibrahim, D., & Abd El-Salam, S. H. (2012). Enzymatic treatment of polyester fabrics digitally printed. J Text Sci Eng, 2, 1-4.
  • Fu, S., Zhang, G., Du, C., & Tian, A. (2011). Preparation of encapsulated disperse dye dispersion for polyester inkjet printing ink. Journal of Applied Polymer Science, 121(3), 1616-1621.
  • Sinclair, R. (Ed.). (2014). Textiles and fashion: materials, design and technology. Elsevier.
  • Khan, M. R. (2016). Pigment ink formulation, tests and test methods for pigmented textile inks. Chemistry and Materials Research, 8(8), 78-86.
  • Elgammal, M., Schneider, R., & Gradzielski, M. (2016). Development of self-curable hybrid pigment inks by miniemulsion polymerization for inkjet printing of cotton fabrics. Dyes and Pigments, 133, 467-478.
  • Marie, M. M., El-Hamaky, Y. H., Maamoun, D., Ibrahim, D. F., & Abbas, S. M. (2013). Pigment ink formulation for inkjet printing of different textile materials. International Journal of Innovation and Applied Studies, 4(1), 239-247.
  • Leelajariyakul, S., Noguchi, H., & Kiatkamjornwong, S. (2008). Surface-modified and micro-encapsulated pigmented inks for ink jet printing on textile fabrics. Progress in Organic Coatings, 62(2), 145-161.
  • Kangwansupamonkon, W., Suknithipol, M., Phattanarudee, S., & Kiatkamjornwong, S. (2011). Inkjet printing: effects of binder particle size and chitosan pretreatment on the qualities of silk fabric. Surf Coat Int, 94, 216-225.
  • Shen, Q., Chen, S., Wang, C., Liu, C., & Tian, A. (2014). A foam single-face pretreatment to modify silk fabric using EBODAC to improve inkjet printing performance. The Journal of the Textile Institute, 105(8), 799-805.
  • Fang, K., Wang, S., Wang, C., & Tian, A. (2008). Inkjet printing effects of pigment inks on silk fabrics surfacemodified with O2 plasma. Journal of Applied Polymer Science, 107(5), 2949-2955.
  • Gao, C., Xing, T., Hou, X., & Chen, G. (2019). Preparation of disperse inks for direct inkjet printing of non-pretreated polyester fabrics. RSC advances, 9(34), 19791-19799.
  • Tse, M. K., Briggs, J. C., Kim, Y. K., & Lewis, A. F. (1998). Measuring print quality of digitally printed textiles. Recent progress in ink jet technologies II, 548-612.
  • Liao, S. K., Chen, H. Y., & Kan, C. W. (2009). A Study of Quality Factors for Cotton Fabrics in Ink-Jet Printing. Research Journal of Textile and Apparel.
Toplam 50 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Mühendislik
Bölüm Makaleler
Yazarlar

Gökhan Erkan 0000-0002-2239-9556

Dilara Sevindik 0000-0001-8708-1939

Yayımlanma Tarihi 30 Kasım 2023
Gönderilme Tarihi 20 Temmuz 2022
Kabul Tarihi 3 Nisan 2023
Yayımlandığı Sayı Yıl 2023 Cilt: 10 Sayı: 2

Kaynak Göster

APA Erkan, G., & Sevindik, D. (2023). Tekstil Endüstrisinde Kullanılan İnkjet Baskı Mürekkepleri. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, 10(2), 430-444. https://doi.org/10.35193/bseufbd.1146103